Search
Saturday 26 May 2018
  • :
  • :

Storage Tips for Your electronic devices

Storing your electronic devices requires a lot of consideration if you want to make sure that they last longer. As most of the devices require a regular usage, so when you happen to store them, you would need to make sure that they are kept in the right manner. There are several types of storage units North York which can be used according to the electronic device that needs to be stored. To learn more about the tips that can be used for storing the electronic devices read below:

Image result for Storage Tips for Your electronic devices

Clean the excess dirt and dust

The electronic devices happen to collect dust quickly, and if left untouched for a long time can lead to issues in working. Even when you are considering to store your devices just make sure they are cleaned and wiped down. For internal areas where you cannot reach easily, use compressed air or quick dry solvent to tackle the issue.

Remove batteries and avoid storing them

You should avoid storing batteries in bulk as they have the potential to get damaged. Also, leaving the battery connected to an electronic device can harm them thus turning them into a mess of battery acid. However, integrated batteries such as that of laptop and camera can be left in the devices.

Use the original packaging

There is a reason behind storing electrical devices in a certain packaging box as it can hold the device properly even if it is going to be stored for a longer period of time. Hence, it is advised that you pack your electronic devices in their original storage boxes as they come with foam and have sufficient packaging space to keep the equipment safe. When you are storing several devices in one box, make sure that you separate the space between them with a bubble wrap or packaging paper so as to avoid a collision and stop movement.

Use static-free wraps

Most of the electronic devices including laptops, gaming consoles, and smartphones, etc., do not require static-free wrap for storage. However, internal components used in these devices are delicate and should be kept in static-free packaging so as to ensure that they last longer.   Static wraps are made up of PET which acts a shield and protects them from damage.

Be careful with the use of plastic

If you are thinking to store your electronic devices in a plastic just so to protect them from water, then you should rather avoid doing so as that might lock-in the moisture which can gradually affect the device.  As an alternative, you can also place silica gel sachets with each of the devices as this would help in soaking excess humidity and would keep the device dry.

Don’t leave the cables tangled

Cables should not be left connected for a longer period of time as they seize in their sockets. So, when not in use, store them away by curling each of these in a loop. If you leave the cable wires tangled for a long time, they might get damaged or loosen up.

Image result for Storage

Keep the back up of your computer files

Back up all the data on a hard drive or a cloud server before putting it into a storage unit so that you do not lose the important files. Remove discs from drives as they have chances of getting warp and stuck if they are left inside for a longer period. It should be noted that the computer should not be stored in extreme temperatures as that might damage it severely.

Store TV’s and monitors in their original packages

Store the TV’s and monitors in an upright position rather than lay them flat. Also, keep them in their original boxes so that they fit well and do not from their position when they are shifted from one place to another.

Now that you are somewhat aware of the ways in which you can store the electronic devices, you would be able to store them in a proper manner and avoid their chances getting damaged. You might have to take extra care of the devices but at the end, it would be worth all the effort as it would keep your electronic equipment in safety.




Leave a Reply

Your email address will not be published. Required fields are marked *